General Info
Electric Scooter Battery Charger Replacement

Electric scooters and bikes have many different chargers and charging applications. To best determine the charger that your scooter requires simply check the charger for the Watts, Volts, and Amp Hours. (W, V, Ah). Most scooters have multiple batteries wired together to make one big battery. Your batteries will have the voltage and other output listed, in most cases. If they do not there are some alternate ways to find out your scooter’s output.

Checking Your Charge System And Adding Up Your Batteries

Your scooter will have multiple batteries that are wired together to make one. The output of the complete battery capabilities will be the number of volts of each battery added up. For example, Three 12v batteries would make 3x12v=36v system. The batteries all work together to make the 36 volts. There are also “Amp-Hours” , and watts too, but the volts is the most important number. If you have 4x12v batteries, your system is 48v. The charger will be specified for your system. 12v, 24v, 36v, or 48v.

Electric Scooter Battery Charger Replacement

Electric scooters and bikes have many different chargers and charging applications. To best determine the charger that your scooter requires simply check the charger for the Watts, Volts, and Amp Hours. (W, V, Ah). Most scooters have multiple batteries wired together to make one big battery. Your batteries will have the voltage and other output listed, in most cases. If they do not there are some alternate ways to find out your scooter’s output.

Checking Your Charge System And Adding Up Your Batteries

Your scooter will have multiple batteries that are wired together to make one. The output of the complete battery capabilities will be the number of volts of each battery added up. For example, Three 12v batteries would make 3x12v=36v system. The batteries all work together to make the 36 volts. There are also “Amp-Hours” , and watts too, but the volts is the most important number. If you have 4x12v batteries, your system is 48v. The charger will be specified for your system. 12v, 24v, 36v, or 48v.

Identifying Your Scooter’s Replacement Charger Plug Type


One more thing to look for when you are sourcing a replacement charger is to familiarize yourself with the plug type on the charge port side of your charger. Smaller output scooters like Razor, Izip, Currie, GT, X-treme, and Mosquito will have one prong, or two prong connectors. The larger scooters like the Go-ped, X-treme, Ezip, Izip, and other electric bike kits will take a three prong connector. The more power that your scooter or bike puts out, the more prongs you will find on your scooter’s Charger Plug. Some plug-ends are custom made by the manufacturer, so you may need to source the part from the original manufacturer of your scooter or bike.

Checking Your Charger For Damage or Defects

Chargers are very simple. The wall plug goes into the wall outlet, and the Charging end plugs into the charge port. If you suspect your charger is broken or not working properly you can inspect the charger for any damage. Check the wall outlet, as well as the scooter charging outlet for cracks or any exposed wires. Cats love to chew chords, and so do other rodents that may be in your garage or house, so check the charge chord for damage. If your charger has a red/green light system, you should see red when the scooter is charging and green when the batteries are full. If you see blinking or odd lights you should check out your charger. The only way to positively identify the problem is with a Volt-Meter, which will tell you if the charger is working or not.

Good Sources for Electric Scooter Replacement Chargers and Batteries

1. Electric Scooter Parts Store With “Find a Repair Shop” and Charger Replacements.

2. Electric Scooter Information and Resources Website With Comments Section.

3. Electric Scooter Purchasing Store With Customer Service, and Warranty Service.

Right

This is an example of a module published to the right position. There are also left, insets, rows, etc. positions and many others, be sure to read the full description. This is the default style that will appear for most module positions in the white body area.

Dynamic Colors

To use a dynamic color for a module title simply enter any hex color code along with any module class suffix you would like use into the module class field of any module:

Examples:
BF1FAE
-dark 058B0F
-transparent_dark D69E16
-no_padding A81111

You must enter the suffix exactly as shown with a space after the suffix. If you are not using a class suffix simply enter the hex color only. This can be applied to any module class above.

Websites We Visit

Here are some of the websites we visit often and recommend:

 

Article Tree

Powered by mod LCA

-dark

This is the -dark module style and can be applied to most most module positions.

S5 Box

Login

Register